Ni-mh Battery Fits Nikon, 330 Total Stations, Dtm-300, Dtm-302 7.2v, 3500mah

Battery Fits Models:- Npl-302, Dtm-300, Trimble Ts 255, Dtm-310, Trimble Ts 415, Dtm-350, Dtm-400, 330 Total Stations, Npl-350, Dtm-302, Trimble Ts 400, Dtm-322, Trimble Ts 515, Dtm-352

Battery Part Numbers:- 4/ur17650/3500, Bc-65, Bc-60

The Cameron Sino range of batteries have been designed to be safe, well built, and are historically the most reliable and cost effective generic batteries that we have ever supplied, They are designed with safety as a priority and should last as long as the original batteries that came with your device. This product that we supply may be a generic version of the battery, but we can assure you that it is designed and built to be as robust and as good performance as the original battery. We try to keep our data as current as possible, but there may be occasions when new models have not been updated to the website yet. If in doubt contact us and we will confirm fitment. We try to keep our data as current as possible, but there may be occasions when new models have not been updated to the website yet. If in doubt contact us and we will confirm fitment. Look at the data below and make sure that the models that you see in the tables covers your product. If you cannot match both the model and battery number contact us and we can confirm fitment for you. The warranty we offer on all of our Cameron Sino products is pretty simple to use, we make returns easy and will quickly test and replace any product found to have an issue within the 12 or 6 months warranty period. The product needs to be returned to our Ontario facility but this is much cheaper than trying to return to the far east like some suppliers insist on. What's the average life of a Lithium Ion or Lithium Polymer battery? Usually it is around 400 cycles for Lithium Ion and usually this is the same for Lithium Polymer. Slightly different is Nimh, It should last for around 500 cycles. (cycling a battery means to discharge and recharge.) Its not a common known fact that a cycle will still be used, even if only partially discharged then recharged. Its good practice to run the battery low and recharge when the battery reaches about 10% of its charge left. This will extend the life of the battery and maintain its capacity for charge. Being an ISO 9001 certified factory means that the range of batteries that Cameron Sino build have to be manufactured with only the highest quality components and to a very high level of integrity. You can be sure that the batteries that supply from them are fully tested in the devices they are designed for and are built with all the same safety protocols as the original battery with the same safety circuits contained within. All of the fitments that we know that this battery are shown in the information provided below. Special Remarks:-None at this timeThe four most important pieces of data that you will need to have to confirm the fitment of this battery in your device. 1. The model of your device, 2. The original battery number - found on the original battery 3. The manufacturer. 4. Make sure that the voltage of your battery match's or is within a couple of points of our battery. This is the only way to be 100% sure this is the correct battery.Mah is the rating which estimates the amount of charge that a battery will hold or how much current it will provide for how long. The higher the this rating the longer the runtime.